产品名称:
Features
·Double-layer large-scale weighing platform, anti-side impact, over-voltage protection, tightly protecting the load cell;
·Filling is prohibited if there is no barrel on the weighing platform, alarm for parameter error, and barrel collision protection;
·The gun is drip-proof, splash-proof, and the operating environment is clean; quick-disconnect joints, easy to disassemble and wash;
· Equipped with gas collection and exhaust interface, which can be connected to recovery devices such as VOC;
·200 groups of formulas can be set and stored, and U disk data storage
·Two filling methods of net weight/gross weight
·Automatic/manual two operation modes
·Each gun feeding fast/medium/slow three-level speed
·Automatic electrical linkage to control the delivery pump and the rear valve
·Modbus TCP, CANOpen, EtherCAT, ProfiBUS and other interfaces can be reserved, and can be connected to ERP and other systems to facilitate remote monitoring and management
·Easy to use:
Mode 1: Manually empty the barrel-manual single gun to the barrel-start filling-fill completed-automatically lift the gun-unload the full barrel
Mode 2: Remote connection to realize unattended batching
Basic parameters
(According to customized requirements and specifications)
·Maximum weighing capacity: 100kg
·Minimum inductance: 0.01kg
·Filling range: 100kg
·Filling error: ≤0.1%
·Tip material: SUS304 stainless steel (tetrafluoroethylene)
·Applicable container: ≤Ф600xh1000mm
·Explosion-proof grade: EXdIIBT4
·Power supply: AC220/50Hz
·Using air source: 0.4-0.8Mpa
·Using temperature: 10℃-120℃
·Control mode: 3-speed pneumatic control
·Filling method: liquid level/below
·Material interface: DN40 quick-installed pagoda joint, optional flange joint and specifications.
Optional peripherals:
1. Pump
2. Filter
3. Conveyor
4. Backflow valve
5. Capping device
6. The automatic filling line can be designed according to the user's site
Optional models:
Standard type, explosion-proof type, all stainless steel structure type.
focus on us