A brief analysis of weighing equipment manufacturers should pay attention to the use of weighing equipment

Weighing equipment is already an indispensable mechanical equipment in life now. With the development of economy, weighing equipment has also been further developed. Weighing equipment manufacturers should pay attention to the matters that should be paid attention to when using this product. We bring a series of analysis, hoping to help you in using the product.

One is to warm up in advance. Weighing equipment usually needs to be preheated before use, and the preheating time of weighing equipment is often different. Generally speaking, the higher the accuracy level of the weighing equipment, the longer the preheating time required. It can be preheated according to the requirements of the weighing equipment. If necessary, the preheating time can be extended (the lower the ambient temperature), and the preheating time is longer. Low. The longer the heating time). Weighing equipment manufacturers claim that many users use the weighing equipment at one time, so that the measurement performance of the weighing equipment cannot be guaranteed. Therefore, the preheating of the weighing equipment is the key to accuracy.

The second is environmental conditions. Environmental conditions are also an important factor affecting the measurement performance of weighing equipment. If there is no special temperature limit specified in the operating instructions of the weighing equipment, the weighing equipment should work normally at a temperature of 10°C to 40°C; if a special temperature limit is specified, the weighing equipment should work at the specified temperature C . Weighing equipment also requires environmental humidity, such as relative humidity for level I balance. The degree does not exceed 80%.

Three is a horizontal state. General high-precision weighing equipment is equipped with a level adjustment device and a level meter. In fact, some users often neglect the inspection of the horizontal status of the weighing equipment (the weighing equipment often causes four or unequal angles due to movement or other reasons), which is also the main reason for the inaccurate data of the weighing equipment.

Four is calibration at any time. It is believed that weighing equipment is accurate within the validity period after periodic calibration, and the importance of calibration is often ignored, even if there is no calibration. Due to changes in environmental conditions and human factors in the use of weighing equipment, weighing equipment manufacturers claim that measurement performance often changes slightly, which requires us to calibrate it in daily use. So, how should we calibrate it? Weighing equipment should be calibrated every day or every time, and the frequency of calibration can be increased if necessary. In theory, the higher the calibration weight, the greater the weight error, the error is not more than 1/3 of the error, and should be sent to the quality supervision department regularly. If the error exceeds the standard, send the quality supervision department to the supervision department in time to avoid loss and damage to consumers.

Suzhou Aikehua Automation Co., Ltd. is a professional weighing equipment manufacturer. The company provides you with professional products and high-quality after-sales service, and solves the technical problems of the product during use. Welcome to call for consultation and cooperation: 1391579039